bankomatchik.ru

When we enter the Replenish Menu and select INIT EJRNL (Initialise Electronic Journal), Cassettes’ status is printed. In our version (AANDC 03.03.02), the Electronic Journal is as follows: 02.gif However, I have seen other Electronic Journals with Date-Time and Machine Number at the top of their Ele...

Hi,
I did that, but I think the problem cannot be solved only by adding this key to registry. It seems that AANDC 03.01.01 does not fully support Journal Level and adding this key does not make any difference. Are you sure that version 03.01.01 has this capability?

Can anyone help me in changing text Background and Foreground Colour on an ATM locally? I read on the messages of Cardholder Display that this can be done from the Host side (Screen Blinking and Colour Control), but our Host does not do this, and I would like to, for instance, set the Foreground Col...

Can “Journal level” be enabled on AANDC 3.1.1 as well? I looking into AANDC 3.3.2 and found out that “Journal level” has been set in the following registry entry: HKEY_LOCAL_MACHINE\SOFTWARE\NCR\Advance NDC http://bankomatchik.ru/forum/download/file.php?mode=view&id=7782&sid=76aa44e0738d9db6...

Posted after 2 minutes 7 seconds:
I dont have GEP. I want to solve the issue of Client Monitor Graphic Card issue.
Also The Ethernet and Sound card are working but I dont know which PCI device remained.

Dear Dan,
I used your sent drivers and installed 3 of 5 of devices. But 2 of them are remained:

For logging in to Windows on PIVAT motherboards we just had to hold the SHIFT key when Windows Logo appeared. In PIVAT motherboards, it didn’t matter if the PC was inside the ATM or outside, and even if no devices were connected to the PC, we were able to Log-in to Windows by holding the SHIFT key. ...

I downloaded and installed the same drivers that “Dan” had put on the first page of the Forum http://www.ashoori.ir/files/dan-1.gif http://www.ashoori.ir/files/dan-2.gif At the beginning, none of the following five devices were detected: http://www.ashoori.ir/files/detected-5.gif But only two of the...

I have installed XP on Pocono motherboard. When I go to Device Manager, there are five devices which either have not been detected, or their drivers have not been installed correctly. Does anyone have the appropriate drivers for these devices?

Does anyone have the Drivers CD for Pocono Motherboard? I am looking for a CD that comes with the Motherboard inside the box. NCR Pocono D-NR6-D-021 V1.0 TCDNR6D0210BG32K0LY Posted after 14 hours 33 minutes 24 seconds: Есть ли у кого-нибудь компакт-диск с драйверами для материнского плато Pocono? Я ...

Dear Dan, The picture you sent is about installing a Pocono Motherboard inside the standard case made by NCR, and the connectors are connected to F_AUDIO1, PANEL1 and J2. But I want to install the Pocono Motherboard inside a normal case and I have a few separate connectors which are connected on th...

Does anyone have the Drivers CD for Pocono Motherboard? I am looking for a CD that comes with the Motherboard inside the box. NCR Pocono D-NR6-D-021 V1.0 TCDNR6D0210BG32K0LY http://www.ashoori.ir/files/NCR-Pocono.jpg Posted after 13 minutes 41 second: Does anyone have the pinout of J1, J2, F_AUDIO1,...

Dear Magarila, I created a Binary file based on “Programmer’s Manual for the 40 Column Printer” for “Downloadable Character Set” and copied on c:\charfile. Then we sent below command via “WFS_CMD_PTR_RAW_DATA” Execute Commands. 1BH (ESC) 26H ‘&’ <filename> 1BH 5CH (ESC) ’\’ Then we sent below c...

There is possibility in APTRA™ Advance NDC that we choose the printer to use rather Character Sets or OS/2 Code Pages. When in Character Set mode, we use Designator Code. But in Code Page mode, we should enter the three digit as OS/2 Code Page Identifier. Select OS/2 Code Page Character Description ...

I have a small problem with APTRA™ XFS and I hope you can help me with it. I want to connect to devices and send commands through APTRA™ XFS Layer. All devices function properly. The only problem is that EPP operates in the keypad mode and even FDK works. But when we want to initialize it in the Enc...

На странице «EPP BAPE Keyboard» есть 4 опции: http://www.sivantrade.ir/EPP-BAPE-Keyboard-Option.gif Я нажал на 4-ю, чтобы удалить все ключи, но, кажется сделать это невозможно: http://www.sivantrade.ir/Keys-Not-Deleted-Text.gif Есть ли какая либо связь между первой опцией (Security Module Load File)...

In one of the bank branches, Cassette “1” magnets were mistakenly placed in the format of Cassette “3”, while containing higher value banknotes. The machine considering two cassettes with the same ID, to be of one type, has dispensed the banknotes from both cassettes and the same resulted in a big c...

DEBUG LOG format has changed in Release 03.03.02 to Release 03.01.01. When I clicked on “STARTAPPS WITH WINDOWED DEBUGLOG.CMD” in Release 03.01.01, a window opened and there were 6 windows in it, which logged information separately and online. Now we do not have similar window in Release 03.03.02 an...

In saved Debug Files, information such as Card Number and Customer PIN were saved as character “*”.
It seems it is done for more security. Is there any way not to do this and Logs exactly what was sent and received?

Be Che Dardet Mikhore?!