bankomatchik.ru

Hello, Is using ISO-8583 protocol instead of protocols such NDC and DDC for ATM applicable? I have heard that ISO-8583 is used mostly to make connection between Switch and Host and it is not so common in an ATM. Does it have a technical reason? Has ISO-8583 been defined only in Financial Transactio...

I want to connect an NCR Cash Dispenser to a PC, and send message to it through SDC (RS-485). I have a converter for USB to RS-485. The only issue is that I do not have the messaging protocol. Would you please send me the command list and the messaging format? My Cash Dispenser is model 5877, and it...

Dan писал(а):Do you have the same image ( Ghost, acronis) of Win XP , Apra for 77 and 86 ATM's?

Yes

Folder: Program Files\NCR APTRA\Aggregate Installer
File: activity_inst_xfs.log

Entry Type=AGGREGATE_INSTALL
User Account=SYSTEM
Version=04.02.01

You can do whatever you want, I think I exposed my opinion above. Dear Dan, Please don’t get upset. You are the only person who can help me and until now, all the answers given by you to me have helped me a lot. It seems to me that we are now assured about the soundness of the IMCRW, since it is wo...

Mother Board: PELE II Posted after 20 hours 33 minutes 52 seconds: Now, I have completely noticed that we have two types of Control Boards: P86 Boards and NID Boards. NID Broads have no problems and we have only problems with P86 Boards. Now, what is the solution for it? Shall we solve the problem b...

You’re right. I also meant that since in the PC to IMCRW cable the 2 to 3, 4 to 6 and 7 to 8 pins are connected to each other in cross, one end of that can be connected to COM1 and the other end to COM2, and then we can test both of the ports with two Hyper-Terminal programs.

In P86 Control Boards we are using the following Chips: Am29F040B, M29F040C, M27C1001, M27C2001, AT27C020 Our P86 Control Boards are from the same model, but it is possible that the Part Numbers on the white sticker might be different, but the following information is written on their PCBs: NCR2000 ...

Are you sure that the PC Cable to IMCRW should be Straight and not Cross?
If you look at the PIN Numbers at the two sides of the drawing you had sent, you can see that the Cable is in Cross not Straight.

Do you mean that in addition to two types of Dispenser Control Boards (NID and NID2), there is another type called P86 Control Board? We do not have NID2 model Control Boards, but we have two different Control Boards one of which is installed on Personas™ 86 Dispensers, and the other one is installe...

AS 4450656380 A SC 4450653534 A NCR00 009-0017044 NCR00 009-0017045 10 45 01880 SSL NCR 9-20621 AS-4450656380-A.jpg Posted after 23 minutes 41 second: AS 4450668627A SC 4450653534A NCR 00 009-0017044 NCR 02 009-0017045 12 33 00216 SSL NCR 04 009-0019534 http://www.perto.me/AS-4450668627-A.jpg Posted...

I tested the COM1 and COM2. The IMCRW cable is a Cross cable, and I plugged it to the both COM1 and COM2 and ran the two Hyper-Terminal programs. I put the setting of both of the ports as follows: Bits per second: 9600 Data bits: 8 Parity: None Stop bits: 1 Flow control: None I sent data from COM1 t...

These numbers with 445-0XXXXXX format are obvious to be Part Numbers of the NID Control Boards, but what are the numbers with format 009-00XXXXX? By saying E²PROM P/N do you mean the Part Number of an E²PROM in terms of the manufacturer, or do you mean the version or revisions of the contents inside...

Based on the image ATMtech had sent, our Control Board is NID type. Doesn’t this type of Control Board work with APTRA™ Advance NDC? We haven’t had any problems with these boards in OS/2, but now that the ATMs have been upgraded, we are having problems. Will the problem be solved by upgrading the E²...

I have not yet tested the IMCRW. Do you guess the problem is not the low version of the Firmware, and the problem will be solved by resetting the IMCRW? What do I have to do exactly to reset the IMCRW?

When I put the 2.56 Disk into Floppy Drive and turned the system on, it said the Current Firmware is 2.36 and update conducted and Successful massage appeared. But when system restarted, the version was the same 2.36.
Is our updating way wrong or the disk has problems?

They are NID, not NID2.

Application: APTRA™ Advance NDC Vesion 3.1.1
ATM Models: Personas™ 75, Personas™ 77 and Personas™ 86
Operating System: Windows XP Professional (Service Pack 2)

We have Personas™ 86 and Personas™ 77 ATMs. Their Cash Dispenser Control Boards are different. Their client is upgraded and changed from OS/2 to Windows (APTRA™ Advance NDC). We hadn’t any problems when they were OS/2, but P86 Machines got some problems since they are changed to Windows. I mean the ...